Ethernet (TCP/IP) Cable Pin Assignments Communications Protocol
82 CubiScan 125
The following table shows the parameters for asynchronous com-
munications through the RS-232 serial cable.
Ethernet (TCP/IP) Cable Pin Assignments
The CubiScan 125 Ethernet port uses the 10/100Base-T TCP/IP
communications protocol. The following table shows the Ethernet
RJ-45 connector pin assignments.
Asynchronous
Communication Parameters
Baud Rate 9600
Parity None
Data Bits 8
Start Bits 1
Stop Bits 1
RJ-45 Connector Pin Assignments
Pin Signal Description
1 TD+ Transmit Data
2 TD- Transmit Data
3 RD+ Receive Data
4 NC No Connection
5 NC No Connection
6 RD- Receive Data
7 NC No Connection
8 NC No Connection
To Next Page
Loading...
