CubiScan 125 Operations and Technical Manual
CubiScan and the Quantronix logo are registered trademarks of Quantronix, Inc.
Scanning New Dimensions, Qbit, and The FreightWeigh System are trademarks of Quantronix, Inc.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
All other brand and product names used in this manual are trademarks or registered trademarks of their respec-
tive companies.
CubiScan 125 software and firmware are protected by international and domestic copyrights.
CubiScan 125 measurement products incorporate technology protected by patents pending.
This document copyright © 2011 by Quantronix, Inc. All rights reserved.
No portion of this manual may be reproduced in any form without written permission from Quantronix, Inc.
Information in this manual is subject to change without notice.
Manual updated April 12, 2013.
CAUTION
The CubiScan 125 should only be serviced by qualified personnel.
Observe precautions for handling electrostatic sensitive devices when
setting up or operating the CubiScan 125.
WARNING
Disconnect all power to the CubiScan 125 before servicing or making
any connections.
To Next Page
Loading...
Need help?
General
