103
{2:YYMMDD} Date in EAN 128 code
{62:YYMMDD} Product expiry date in EAN 128 code
38. ANNEX 02 – Label Template
Label template can be created:
• via scale, using available variables,
• via Label Editor R02 PC software.
For detailed description concerning creation of label
template via PC software, read user manual of „Label Editor
R02”.
In order to work in label scale mode, assign a label with a template to
a particular product or customer.
38.1. Creation of a Label Template via the Scale
• Enter <Databases / Labels> submenu and select a respective entry.
• Enter <Project> parameter, <Project> edit box is displayed.
• Modify selected label project and press
key to confirm.
38.2. Sending a Label Template to the Scale Memory
• Copy label template with *.lb extension, made using „Label Editor R02”,
onto the USB flash drive.
• Connect the USB flash drive to scale's USB port.
• Enter <Databases / Labels> submenu and select a respective entry.
• Enter <Project> parameter, <Project> edit box is displayed.
• Press
key to change keypad working mode, run mode
(bottom bar operation).
• Press
key that is a counterpart of pictogram (import), box with
USB flash drive content is displayed.
• Select the previously copied label template with *.lb extension, the scale
program inserts selected template into the edit box.
• Press
key to confirm.
38.3. Assigning a Label with a Template to a Product
• Enter <Databases / Products> submenu and select respective entry.
To Next Page
Loading...
