66
Custom functions of <Labelling mode> submenu:
Labels quantity
Parameter for declaring number of labels to be printed
on the scale-connected printer.
C labels quantity
Parameter for declaring number of C labels to be printed
on the scale-connected printer.
Automatic C Label Triggering For detailed description read section 25.7.1.
25.7.1. Automatic C Label Triggering
Automatic C Label Triggering function allows to trigger printout of C label, to do
it you must define <Mode> and <Threshold> parameters.
Procedure:
• Enter <Working modes> submenu and select respective working mode.
• Go to <Labelling mode / Automatic C label triggering / Mode>
parameter and set respective option, where:
None
Manual printout of C label *, performed upon pressing of either
or
button.
Mass
Automatic printout of C label, triggered upon exceeding of the total mass value
of single labels, set in <Threshold> parameter.
Number
Automatic printout of C label, triggered upon exceeding single labels quantity, set
in <Threshold> parameter.
*) Manual printout of C labels is carried out using one of the two below
programmable buttons:
Printout with zeroing (weighings qty. and total mass values are zeroed).
Printout without zeroing (weighings qty. and total mass values are not zeroed).
In case of automatic printout of C labels, counter zeroing
function is always on (weighings qty. and total mass values
are always zeroed).
• To confirm introduced modifications, press key and go to
<Threshold> parameter, <Threshold> edit box opens.
• Set the value that is to trigger C label printout, mind that:
− in case of <Mode> parameter set to <Mass> value, you must provide
total mass value, upon obtaining of which you want the C label
printout to be triggered,
To Next Page
Loading...
