74
29. WORKING MODE – DOSING
Dosing is a working mode enabling you to dispense product. Two options are
available, manual and automated dispensing.
29.1. Home Screen
29.2. Local Settings
In order to access local settings, press operation panel key to which
<
Working mode parameters> pictogram is assigned:
Request cycles quantity
Enter to force query regarding number of dosing process cycles,
i.e. to specify how many times the whole process is to be
repeated.
Fast dosing output
Enter to declare outputs for rough dosing in case of automatic
2-stage dispensing.
Dosing outputs
Enter to declare outputs for precise dosing in case of automatic
2-stage dispensing.
Dosing correction
Enter to correct the dosed mass, this function allows to optimise
the dosing process, change of pressure of dosed material in the
silos is accounted for. Parameters: Constant correction –
specifying global (constant) value of correction to be applied
during each process; Maximum correction – specifying
maximum value of correction, which can be determined
automatically during the process; Measurements quantity for
correction calculation – specifying how many of the most
recent measurements is to be analysed in order to automatically
calculate the correction during the process.
Readout For detailed description read section 25.1.
Proximity sensors For detailed description read section 25.2.
To Next Page
Loading...
