RADWAG PUE C32

59
Time format **
Enter this parameter to set time format. Options: HH:mm:ss 24H (set by
default), HH:mm:ss 12H, HH-mm-ss 24H, HH-mm-ss 12H, HH.mm.ss
24H, HH.mm.ss 12H.
*) Date format symbols: Y – year, M – month, D – day.
*) Time format symbols: HH – hour, mm – minute, ss – second, 24H – 24-hour mode,
12H – 12-hour mode.
21.6. Backlight Standby Time
Parameter allowing you to set time interval, in [min], after which the screen
goes black.
Procedure:
• Enter <Misc / Backlight standby time> submenu and set respective
value.
Values: None (set by default), 0.5, 1, 2, 3, 5.
21.7. Automatic Shutdown
Parameter allowing you to set time interval, in [min], after which the weighing
device shuts down automatically. If the indication is stable during the declared
time interval, then automatic shutdown proceeds. Shutdown function is inactive
and the device cannot be turned off when any of the processes is ongoing
or when the menu is operated.
Procedure:
• Enter <Misc / Automatic shutdown> submenu and set respective value.
Values: None (set by default), 1, 2, 3, 5, 10.
21.8. Default Operator Settings
Parameter allowing you to restore default operator settings.
Procedure:
• Enter <Misc / Restore default operator settings> submenu, a respective
warning is displayed: <Continue?>.
• Press
key to confirm. Message <Please wait...> is displayed,
the operation is in progress.
• After completed operation <Misc> submenu is displayed.