72
27.6. Entering Reference Sample Mass to the Scale Memory
Reference sample mass of single part can be entered to products database.
Procedure:
• Press
button, select the given product.
• Determine reference sample mass (read sections 27.3 and 27.4 of this
user manual).
• Press
button (Assign reference sample), reference sample mass for
the product is recorded in <Part mass> entry.
28. WORKING MODE - PERCENT WEIGHING
Percent weighing is a working mode enabling you to compare the measured
sample with the reference mass. The result is expressed in [%]. Reference
mass can be either determined by weighing or entered to the scale memory by
an operator.
28.1. Home Screen
28.2. Local Settings
In order to access local settings, press operation panel key to which
<
Working mode parameters> pictogram is assigned:
Readout For detailed description read section 25.1.
Proximity sensors For detailed description read section 25.2.
Save mode For detailed description read section 25.3.
Auto threshold For detailed description read section 25.4.
To Next Page
Loading...
