56
Accessibility of particular units is conditioned by weighing
device status; i.e. it depends on the fact whether the given
scale is verified or not.
20.1. Units Availability
Parameter allowing to declare which units are to be accessible upon pressing
key.
Procedure:
• Enter <Units / Availability> submenu.
• Units list is displayed, mark units of your choice as available.
Where:
Unit enabled.
Unit disabled.
20.2. Start Unit
Parameter allowing you to set start unit. Upon setting the start unit, the scale
activates with the set start unit for these modes where change of the unit is
possible.
Procedure:
• Enter <Units> submenu, next enter <Start unit activation> parameter.
• Go to <Start unit> submenu and select start unit from the list.
• Go back to the home screen and restart the weighing device.
• After restart, the weighing device runs with the declared start unit.
20.3. Gravitational Acceleration
<Gravitational acceleration> parameter compensates changes of gravity
force being a result of different latitude and altitude when the selected unit is
„Newton” [N].
Procedure:
• Enter <Units / Gravitational acceleration> submenu, <Gravitational
acceleration> edit box is displayed.
• Enter gravitational acceleration value respective for the particular place of
use and press
key to confirm changes.
To Next Page
Loading...
