RADWAG PUE C32

85
Bar graph operation:
• Visualisation of mass value lower than the value of [LD], low deviation:
• Visualisation of mass value higher than the value of [LD], low deviation,
and lower than the value of [HD], high deviation:
• Visualisation of mass value higher than the value of [HD], high deviation:
• Weigh expected amount of each ingredient.
In the case of trying to accept unstable weighing result, the
following message is displayed: <Unstable measurements>.
• After weighing of the last ingredient, PS=Completed status is displayed
(process completed).
• New formulation process may begin.
30.5. Formulation Report
Formulation report is automatically generated at the end of each formulation
process, next it is sent to port selected for <Peripherals / Printer>. To declare
report content go to <Printouts / Formulation report> submenu. For
instruction on how to declare adjustment report settings read section 'Printouts'.
Report example:
-----------Formulation report-----------
Start date 2018.07.10 13:21:40
End date 2018.07.10 13:23:28
Operator Nowak Jan
Preset mass 3.000 kg
Sum 3.018 kg
Difference 0.018 kg
Status Completed
----------------------------------------
Signature
........................................
LD=1.600kg
HD=1.800kg
LD=1.600kg
HD=1.800kg
LD=1.600kg
HD=1.800kg