RADWAG PUE C32

45
Variables
Variable name Description
Dosing process Completed dosing process name.
Start date Dosing process start date.
End date Dosing process end date.
Operator Operator carrying out the dosing process.
Customer Customer for whom the dosing process is carried out.
Preset mass Declared dosing net weight.
Sum Net value of mass that is to be dosed, given in an adjustment unit.
Difference
Difference between the net value of mass that is to be dosed and a
value of automatic dosing threshold.
Dosing correction Dosing correction value.
Status
Status of the dosing process, values: Ongoing, Completed,
Aborted.
Dashes Dashed line separating printout data and signature fields.
Signature
An area for the signature of an operator carrying out the dosing
process.
Non-standard printout One of 10 non-standard printouts.
16.5. Formulation Report
Group of parameters allowing you to declare variables that are to be printed on
a formulation report printout. Formulation report is generated automatically
after either completion or abortion of each process.
Variables
Status
Formulation performance status. Status values: Ongoing, Aborted,
Completed.
Start date Formulation start date.
End date Formulation end date.
Formulation Performed formulation name.
Operator
Operatorperformingformulationprocess.
Customer Customer for whom the formulation is carried out.
Ingredient quantity Number of formulation ingredients.
Measurement quantity Number of weighings performed within the formulation cycle.
Lot number Lot number assigned to a formulation.
Measurements List of weighings performed within the formulation cycle.