RADWAG PUE C32

23
• Enter the password and press key to confirm, the home screen is
displayed.
12.2. Log Out Procedure
• Go to the home screen, press key, wait for the operators
database to open.
• Select <Log out> option, the home screen is displayed.
12.3. Permission Levels
There are 4 permission levels: Administrator, Advanced Operator, Operator,
None.
Access to operator-related parameters and program functions
is conditioned by a permission level:
Permissions Available parameters and functions
None
Permission to edit operator-related parameters not granted. Operator can
neither accept the weighing result nor start the following operations:
entering reference sample mass and determining reference sample
quantity in <Parts counting> mode, entering reference sample mass and
determining reference sample in <Percent weighing> mode, dosing,
making formulations.
Operator
Operator can edit <Readout>, <Misc> parameter groups (operation
of <Date and time> parameter and <Restore operator's default settings>
function excluded). Operator can run and carry out all weighing
operations.
Advanced
operator
Operator can edit all operator-related parameters excluding <Date and
time> parameter. Operator can run and carry out all weighing operations.
Administrator
Operator can edit all operator-related parameters and all databases, and
use all functions. Operator can run and carry out all weighing operations.
13. WEIGHING
Load the weighing pan. Read the result when stability marker is
displayed.
Only stable weighing results can be recorded (stability marker
).