8
2.2. Battery Power Supply
The PUE C32 indicator can optionally be supplied by NiMH battery (nickel
metal hydride) of 1800 - 2800 mAh capacity.
Do not let battery discharge in case of prolonged storage
of the device in low temperature.
A worn out battery can be replaced only by the
manufacturer or by the authorized service.
The equipment including accumulators does not belong to
regular household waste. The European legislation requires
electric and electronic equipment to be collected and
disposed separately from other communal waste with the
aim of being recycled. Dear user, you are obliged
to dispose of the worn out battery as regulated.
Notice: Symbols on batteries identify harmful compounds: Pb = lead,
Cd = cadmium, Hg = mercury.
3. MAINTENANCE
In order to ensure safety in the course of cleaning, it is necessary to disconnect
the device from the mains. With this condition met, uninstall the weighing pan
and other detachable components.
Cleaning the weighing pan while still installed may cause
damage of the measuring system.
3.1. Cleaning ABS Components
To clean dry surfaces and avoid smudging, use clean non-colouring cloths
made of cellulose or cotton. You can use a solution of water and detergent
(soap, dishwashing detergent, glass cleaner). Gently rub the cleaned surface
and let it dry. Repeat the cleaning process if needed.
In the case of hard to remove contamination, e.g. residues of adhesive, rubber,
resin, polyurethane foam etc., you can use a special cleaning agents based on
a mixture of aliphatic hydrocarbons that do not dissolve plastics. Before using
the cleanser for all surfaces we recommend carrying out tests. Do not use
cleansers containing abrasive substances.
To Next Page
Loading...
Need help?
General
