97
I/O cable
„Scale-Ethernet” cable is a standard network cable terminated
with RJ45 connectors on both ends.
35. TECHNICAL SPECIFICATIONS
Maximum quantity of verification units 6000
Maximum impedance of load cell 1200 Ω
Minimum impedance of load cell 50 Ω
Maximum voltage per verification unit 3.25 µV
Minimum voltage per verification unit 0.4 µV
Connection of load cells 4 or 6 wires + shield
Load cell excitation voltage 5V DC
Maximum signal gain 19.5 mV
Display 5” colour graphic display
Ingress protection IP43
Housing ABS plastic
Maximum number of connected platforms 1
Power supply 10 ÷ 16VDC
Operating temperature 0°C ÷ 40°C
Communication Interfaces
2xRS232, USB A, USB B, Ethernet, wireless
communication, 4I/O (option)
Multi range option YES
To Next Page
Loading...
