36
Ethernet
Ethernet port (RJ45 connector) used for connecting a network printer or a
computer with RADWAG-designed program, e.g. RAD KEY.
Pendrive
USB port of type A used for connecting a USB flash drive in order to print
weighings to a text file.
Wireless
communication
Port for sending data to a computer or a network printer via a wireless
network.
Procedure:
• Enter <Peripherals / Printer / Port> submenu and set respective option.
<Port settings> submenu differs depending on the selected port:
Port Settings
RS232 (1)
RS232 (2)
Baud rate: 2400 - 115200 bit/s.
Data bits: 7, 8.
Stop bits: 1, 2.
Parity: None, Odd, Even.
USB A
-
Pendrive
-
USB B
-
Ethernet
Wireless
communication
IP Address: IP address of the scale.
Port: number of port for transmission protocol.
Timeout [ms]: time delay - time interval for disconnection, counted from
the moment of the most recent command sent from the peripheral
device to which the weighing device is connected.
15.2.2. Code Page
In order to provide correct integration of the weighing device with the printer
(correct printout of diacritical signs of a given language) it is necessary to make
sure that the code page of a sent printout is accordant with a code page of a
printer. There are two methods for obtaining code page accordance:
• by setting the right code page in the settings of a printer (read the user
manual of the printer) – it must be accordant with the printout code page of
a weighing device:
Code page Language
1250
Polish, Czech, Hungarian.
1252
English, German, French, Spanish, Italian.
1254
Turkish.
• by sending the control code from the weighing device, which automatically
sets the right code page of the printer (i.e. code page accordant with the
one of a weighing device).
To Next Page
Loading...
