40
Filtering criteria conditioned by the field type:
Field selection Filtering
None
*
Product
Name, Code, Name 2, Code 2.
Operator
Name, Code.
Customer
Name, Code.
Packaging
Name, Code.
Lot number
**
Batch number
**
*) - <Filtering> submenu hidden. Function inactive.
*) - <Filtering> submenu hidden. Function active.
15.3.7. Test
Parameter allowing you to verify if operation of a barcode scanner connected to
the scale is correct.
Procedure:
• Enter <Barcode Scanner / Test> submenu, <Test> edit box is displayed,
it features ASCII field and HEX field.
• The code is scanned and entered to the ASCII field and HEX filed, next
the test result is displayed in the bottom part.
When:
• <Prefix> and <Suffix> declared in scale settings comply with <Prefix>
and <Suffix> of the scanned code, the test result is <Positive>.
• <Prefix> and <Suffix> declared in scale settings do NOT comply with
<Prefix> and <Suffix> of the scanned code, the test result is
<Negative>.
15.4. Additional Display
Settings of connection between a scale and an external additional display.
15.4.1. Port
Parameter allowing you to set port for communication between the weighing
device and the additional display. Available ports: RS232 (1), RS232 (2).
To Next Page
Loading...
