35
• Enter respective value and press key to confirm changes.
15.1.6. E2R
Parameter allowing you to establish connection between the scale and the E2R
System PC software. E2R System is a modular solution designed to
comprehensively manage production processes, some stages of which consist
in weighing.
<E2R> can be activated exclusively
by the <Administrator>
user. In case of integration of the scale with <E2R System>
software, editing of databases on scales is disabled.
Procedure:
• Enter <Peripherals / Computer / E2R> submenu and set respective
option.
Options:
Connection with E2R System inactive.
Connection with E2R System active.
15.2. Printer
<Printer> submenu allows you to:
• set port for establishing communication with a printer,
• select printer code page,
• define print start - <Prefix> parameter,
• define print end - <Suffix> parameter.
To set 'scale' - 'printer' communication parameters go to < /
Peripherals / Printer> submenu.
15.2.1. Port
Parameter allowing you to set port for communication between the scale and
the printer. Available ports:
RS232 (1)
RS232 port (DB9/M connector).
RS232 (2)
RS232 port (DSUB15/F connector).
USB A
USB port of type A.
USB B
USB port of type B used for connecting a computer with RADWAG-
designed program, e.g. RAD KEY.
To Next Page
Loading...
