41
Procedure:
• Enter <Peripherals / Additional display / Port> submenu and select
respective port.
Enter <Communication> submenu and set baud rate, mind
that the set value must be accordant with the additional
display (115200b/s).
15.4.2. Bottom Text Area Template
Additional display features text area for extra information such as date, tare
value etc. Displayed data content is set using the scale.
Procedure:
• Enter <Peripherals / Additional display / Bottom text area template>
submenu, <Bottom text area template> edit box is displayed.
• Modify the template and press
key to confirm changes.
The template can comprise 30 characters maximum.
16. PRINTOUTS
<Printouts> submenu allows you to:
• define template for header, GLP and footer printout,
• define report templates: adjustment, dosing, formulations.
• create 10 non-standard printouts.
16.1. Print Mode: Header – GLP Printout - Footer
Printout comprises 3 basic sections:
Header
Group of parameters allowing you to declare variables that are to be printed
on a header printout.
GLP printout
Group of parameters allowing you to declare variables that are to be printed
on a measurement printout.
Footer
Group of parameters allowing you to declare variables that are to be printed
on a footer printout.
For each section a customised list of printout variables has been specified.
You must set respective option either enabling or disabling particular variable
printing.
To Next Page
Loading...
