28
14. COMMUNICATION
The scale can communicate with peripheral devices, the communication is
established via the following ports: RS232 (1), RS232 (2), USB type A, USB
type B, Ethernet, Wireless communication.
To set the ports go to <
/ Communication> menu.
14.1. RS232
• Select <RS232 (1)> or <RS232 (2)> port.
• Set transmission parameters:
Baud rate
2400, 4800, 9600, 19200, 38400, 57600, 115200 bit/s.
Parity
None, Odd, Even.
14.2. Ethernet
• Select <Ethernet> port.
• Set transmission parameters:
DHCP
Yes, No
IP Address
0.0.0.0
Subnet mask
0.0.0.0
Default gateway
0.0.0.0
MAC address
---
Set the transmission parameters in accordance with your local
network.
<MAC address> parameter is automatically assigned to the
weighing device with <Read-only> attribute.
If you set
option for <DHCP> parameter, the remaining
transmission parameters are given <Read-only> attribute.
14.3. Wireless Communication
Scales equipped with wireless communication module, display pictogram
at the top of the screen, provided that the module is active. The pictogram
indicates the following connection statuses:
To Next Page
Loading...
