44
Procedure for adding a non-standard printout:
• Enter <Printouts / Non-standard printouts> submenu.
• Press
button (add record) assigned to panel key, a new record
is created, it is defined by the following data:
Name
Non-standard printout name (43 characters maximum).
Code
Non-standard printout code (15 characters maximum).
Project
Text editor of printout template (1900 characters maximum).
For detailed information regarding text box read section 10.3.
16.3. Adjustment Report
Group of parameters allowing to declare variables that are to be printed on an
adjustment report printout. Adjustment report is automatically generated at the
end of each adjustment process.
Variables
Variable name Description
Project Project name (31 characters maximum).
Adjustment type Performed adjustment type.
Operator Logged-in operator name.
Project Project name printout.
Date Adjustment performance date.
Time Adjustment performance time.
Scale S/N Serial number of the scale.
Adjustment result
difference
Difference between the mass of the adjustment weight measured during
the last adjustment and the mass of a currently measured adjustment
weight.
Dashes Dashed line separating printout data and signature fields.
Signature An area for the signature of an operator carrying out the adjustment.
16.4. Dosing Report
Group of parameters allowing you to declare variables that are to be printed on
a dosing report printout. Dosing report is generated automatically after either
completion or abortion of each process.
To Next Page
Loading...
