RADWAG PUE C32

82
Request multiplier
Enter to force query regarding formulation multiplier, i.e. value by
which the weight, high deviation and low deviation values of <mass>
type are to be multiplied.
Request cycles
quantity
Enter to force query regarding number of formulation process cycles,
i.e. to specify how many times the whole process is to be repeated.
Request lot number Enter to provide series number for formulation.
Confirm ingredients
manually
Enter to enforce manual confirmation for each weighing by pressing
of
key.
Automatic taring
Enter to enable automatic taring at the moment of formulation start,
and after weighing of each ingredient.
Readout For detailed description read section 25.1.
Proximity sensors For detailed description read section 25.2.
30.3. New Formulation
• Enter < / Databases / Formulations> submenu.
• Press operation panel key to which
pictogram (add) is assigned. New
record is automatically edited. For list of new formulation data read section
31.6.5 of this manual.
• Enter <Ingredients> submenu, add formulation ingredients one by one,
do it by pressing the key to which
(add) pictogram is assigned.
Ingredient data:
Name Ingredient name (43 characters maximum).
Code Ingredient code (16 characters maximum).
Mass Target mass of the ingredient.
Deviation type Declared deviation type: unit of mass or value in [%].
High deviation High deviation of ingredient mass in 'Formulations' mode.
Low deviation Low deviation of ingredient mass in 'Formulations' mode.
Weight entered
manually
Manual mode for entering ingredient mass (ingredient is not weighed).
Formulation ingredients are acquired from <Products>
database.
• Modification of ingredient settings is possible upon editing of the selected
ingredient, to do it press key to which
pictogram (edit) is assigned.