7
1. INTENDED USE
PUE C32 weighing indicator is a device intended to design industrial scales
operating on the basis of load cells. The indicator features ABS plastic housing
and 5'' colour graphic display ensuring perfect readability. It is operated using
22-key membrane keypad equipped with programmable function keys.
Standard design offers two RS232 interfaces, USB type A, USB type B,
Ethernet, wireless communication, 2 proximity sensors, 4 I/O. Optionally the
indicator can be equipped with an internal battery, this allows its operation in
places where there is no access to the mains. The device integrates with
receipt and label printers, barcode scanners and PC accessories (mouse,
keyboard, USB flash drive).
The C32 indicator must not be operated in hazardous areas
endangered with explosion of gases, and in dusty
environments.
2. PRECAUTIONS
2.1. Operation
A. Prior to the first use, carefully read this User Manual. Use the device only
as intended.
B. Place weighed loads in the centre of the weighing pan.
C. Load the weighing pan with loads of gross weight which does not exceed
the maximum capacity.
D. Mind not to leave heavy loads on the weighing pan for longer periods
of time.
E. Protect the indicator against:
- considerable temperature variation,
- solar and UV radiation,
- substances causing chemical reactions.
F. The scale is not intended to be operated in hazardous areas.
G. In case of damage, immediately unplug the device from the mains.
H. Scales to be decommissioned must be decommissioned in accordance
with valid legal regulations.
To Next Page
Loading...
Need help?
General
