38
Remove the USB flash drive from the USB port after about
10s counting from the last measurement record, only after
this time the data is saved. Next plug the USB flash drive to a
computer and read the saved text file.
New data is recorded to an existing file therefore it is possible to continue
recording measurement data to the file once created.
USB flash drive must comprise <FAT files system>.
15.3. Barcode Scanner
The scale can connect with a barcode scanner. The barcode scanner is used
to facilitate quick search for database records.
Enter <Communication> submenu and set baud rate for a
barcode scanner (by default 9600b/s). For a detailed
description of 'scale' - 'barcode scanner' communication, read
ANNEX 04 of this user manual.
15.3.1. Port
Communication between the weighing device and the barcode scanner can be
established via the following ports: RS232 (1), RS232 (2), USB A.
Procedure:
• Enter <Peripherals / Barcode Scanner / Port> submenu and set
respective port.
15.3.2. Offset
Parameter allowing you to set the first significant code's character, characters
preceding the first significant character are skipped during comparison search.
Procedure:
• Enter <Peripherals / Barcode Scanner / Offset> submenu and, using the
on-screen keyboard, enter a required value.
To Next Page
Loading...
