104
• Enter <Label> parameter, the label database with a list of existing labels
is displayed.
• Select a respective label, it is automatically assigned to a product.
38.4. Assigning a C Label with a Template to a Product
• Enter <Databases / Products> submenu and select respective entry.
• Enter <C Label> parameter, the label database with a list of existing C
labels is displayed.
• Select a respective label, it is automatically assigned to a product.
38.5. Assigning a Label with a Template to a Customer
• Enter <Databases / Customers> submenu and select respective entry.
• Enter <Label> parameter, the label database with a list of existing labels
is displayed.
• Select a respective label, it is automatically assigned to a customer.
38.6. Printing a Label with a Template
• Go to the home screen, select a product or a customer with a label
assigned from a database.
• Load the weighing pan, wait for a
pictogram to display, press
key.
• The label is printed via a scale-connected printer.
The label can be assigned to a product or a customer.
A label template assigned to the most recently selected
database entry (a product or a customer) is printed on
a scale-connected printer upon pressing
key.
39. ANNEX 03 - ZEBRA Printer Configuration
Transmission parameters Printout data regarding RS232
Baud rate – 9600 b/sec
Parity control – none
Bits qty – 8 bits
Stop bits – 1 bit
Serial port : 96, N, 8, 1
To Next Page
Loading...
