50
Additionally it shows:
• position of Min and Max thresholds in <Weighing>, <Parts Counting>,
<Percent weighing> working modes,
• position of dosing thresholds in dosing process (read section 29.4 of this
manual),
• position of percent weighing range in formulation process (read section
30.4 of this manual).
<Workspace components> submenu for a field comprising <Bar graph>
widget features the following parameters:
Information Enter this parameter to read info on selected widget type and dimensions.
Settings
This submenu provides two functions: 1. Bar graph type: Linear (linear
presentation of the weighing range); 2. Zoom: Enabling/disabling bar graph
zoom in order to provide more clear visualisation of the 'Min threshold' - 'Max
threshold' range.
Delete
Enter this parameter to delete the widget. Upon entering, a respective warning
is displayed: <Delete?>. Press
button to confirm.
Add
Option available only if the widget has not been added yet. Upon entering
<Add> submenu you can select <Bar graph> widget of particular dimensions.
Bar graph with MIN and MAX thresholds displayed:
Bar graph provides a linear presentation of the weighing range.
Additionally it shows where Min and Max thresholds are (providing that they
have been declared).
• Visualisation of mass value lower than MIN value:
• Visualisation of mass value higher than MIN value and lower than MAX
value:
Min=0g
Max=0g
Min=1600g
Max=1800g
Min=1600g
Max=1800g
To Next Page
Loading...
