77
When:
1. Dosing outputs are declared incorrectly (e.g. lack of active dosing output),
the following message is displayed: <Dosing outputs determined
incorrectly>, next the process is cancelled.
2. Dosing thresholds are declared incorrectly (e.g. 0 values), the following
message is displayed: <Incorrect dosing threshold values>, next the
process is cancelled.
3. The weighing result is unstable, the following message is displayed:
<Unstable weighing result>. The process status changes to Pause and
remains so until a stable weighing result is obtained.
• Upon process start, bar graph of dosed material mass is displayed with
the dosing status.
Workspace data:
DT1 Fast dosing threshold value.
DT2 Dosing threshold value.
Dosing process Ongoing dosing process name.
Tare Tare value (mass of a container, silos, etc.).
P1 1/10 DA -3.000kg [---] Dosing status. For detailed description read section 29.4.1.
Buttons that are assigned to operation panel keys:
Local parameters (button inactive during the ongoing process).
Select a dosing process.
Process start.
Process stop.
Breakdown stop.
To Next Page
Loading...
