R&S FPC Series - Page 379

Function Reference
R&S
®
FPC
376User Manual 1178.4130.02 ─ 07
All Markers Off
See "Removing markers or delta markers" on page 122.
Remote command:
Markers: CALCulate<n>:MARKer<m>:AOFF on page 275
Delta markers: CALCulate<n>:DELTamarker<m>:AOFF on page 271
20.4.19 Marker To Menu
Access: [Mkr →]
Set To Peak.................................................................................................................376
Set To Next Peak........................................................................................................ 376
Set To Minimum.......................................................................................................... 376
All Markers To Peak.................................................................................................... 376
Center = Marker / Level = Marker............................................................................... 376
Marker Tracking.......................................................................................................... 377
Select Marker..............................................................................................................377
Search Range............................................................................................................. 377
Set To Peak
See "Positioning markers automatically" on page 123.
Remote command:
Marker: CALCulate<n>:MARKer<m>:MAXimum[:PEAK] on page 277
Delta marker: CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 272
Set To Next Peak
See "Positioning markers automatically" on page 123.
Remote command:
Marker: CALCulate<n>:MARKer<m>:MAXimum:NEXT on page 277
Delta marker: CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 272
Set To Minimum
See "Positioning markers automatically" on page 123.
Remote command:
Marker: CALCulate<n>:MARKer<m>:MINimum[:PEAK] on page 278
Delta marker: CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 273
All Markers To Peak
See "Positioning markers automatically" on page 123.
Remote command:
not supported
Center = Marker / Level = Marker
See "Positioning markers automatically" on page 123.
Function Reference: Spectrum Application