R&S FPC Series - Page 378

Function Reference
R&S
®
FPC
375User Manual 1178.4130.02 ─ 07
Delta marker position (x-axis): CALCulate<n>:DELTamarker<m>:X on page 273
Delta marker position (relative): CALCulate<n>:DELTamarker<m>:X:RELative
on page 274
Delta marker position (y-axis): CALCulate<n>:DELTamarker<m>:Y? on page 275
Marker Type
See "Selecting the marker type" on page 122.
Remote command:
With corresponding syntax MARKer or DELTamarker
Marker Mode
See Chapter 14.10, "Marker Functions", on page 125.
Remote command:
Noise: CALCulate<n>:MARKer<m>:FUNCtion:NOISe[:STATe] on page 287
Noise result: CALCulate<n>:MARKer<m>:FUNCtion:NOISe:RESult?
on page 286
Frequency count: CALCulate<n>:MARKer<m>:COUNt[:STATe] on page 282
Frequency count: CALCulate<n>:MARKer<m>:COUNt:FREQuency? on page 282
n dB down: CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:STATe on page 286
n dB: CALCulate<n>:MARKer<m>:FUNCtion:NDBDown on page 284
n dB down frequency: CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:
FREQuency? on page 285
n dB down result: CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult?
on page 285
Marker Demodulation
See Chapter 14.10.4, "Marker Demodulation", on page 128.
Remote command:
State: CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe]
on page 284
Modulation: CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect
on page 283
Demodulation time: CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLD
on page 283
Volume: SYSTem:AUDio:VOLume on page 287
All Markers On
See "Adding additional markers" on page 121.
Remote command:
not supported
Marker Display
See "Selecting the marker display type" on page 122.
Remote command:
CALCulate<n>:MARKer<m>:FREQuency:MODE on page 276
Function Reference: Spectrum Application