Raymarine A series - AIS Status Symbols; AIS Silent Mode

16.6AISstatussymbols
AISstatusisindicatedbyasymbolinthedatabar.
SymbolDescription
AISunitisswitchedonandoperating.
AIScurrentlyunavailable.
AISunitisswitchedoff,ornot
connected.
AISunitisinSilentMode.
AISunitisinSilentMode,withactive
alarms.
AISunitisconnectedandswitched
on,buthasactivealarms.
AISunitisconnectedandswitched
on,butthedangerousandlostalarm
isdisabled.
16.7AISsilentmode
AISsilentmodeenablesyoutodisableAIS
transmissions
AISsilentmodeenablesyoutodisablethe
transmittingfunctionsofyourAISequipment.This
isusefulwhenyoudonotwanttotransmityour
vessel’sAISdatatootherAISreceivers,butstillwish
toreceivedatafromothervessels.
Note:NotallAISequipmentsupportssilentmode.
Formoreinformation,refertothedocumentation
thataccompaniesyourAISunit.
EnablinganddisablingAISsilentmodein
theChartapplication
FromtheChartapplication:
1.SelectMenu.
2.SelectAISOptionsor*Radar&AISOptions.
3.**SelectTargets.
4.SelectAISSet-up.
5.SelectSilentMode.
SelectingSilentModewillswitchAISsilentmode
OnandOff.
Note:
*WhenRadaroverlayisalsoenabledthemenu
namebecomesRadar&AISOptions.
**Step3isonlyrequiredwhenRadaroverlayis
enabled.
EnablinganddisablingAISSilentModein
theradarapplication
FromtheRadarapplication:
1.SelectMenu.
2.SelectTargets.
3.SelectAISSet-up.
4.SelectSilentMode.
SelectingAISSilentModewillswitchsilentmode
OnandOff.
AISfunction199