Raymarine A series - Page 236

Navigatingtoalocationonthechart
Fromthechartapplication:
1.Selecttherequiredlocationon-screen.
Thechartcontextmenuisdisplayed.
2.SelectGotoCursor.
Navigatingtothecursorpositiononthechart
usingthemenu
D
11764-2
Fromthechartapplication:
1.Positionthecursoratthedesireddestinationon
thechart.
2.SelectMenu.
3.SelectNavigate.
4.SelectGotoCursor.
Cancellingnavigationtoawaypoint
1.Selectanypositionanywhereon-screen.
Thewaypointcontextmenuisdisplayed.
2.SelectStopGoto.
3.Alternatively,inthechartapplication,goto:Menu
>Navigate>StopGoto.
Note:Oncenavigationisnolongeractive,the
waypointsymbolreturnstoitsnormalstate,and
thedashedlinebetweenyourvesselandthe
waypointisremoved.
Arrivingatawaypoint
Asyourvesselapproachesawaypoint,thewaypoint
arrivalalarmistriggered.
WiththeWaypointarrivalwarningdisplayed:
1.SelectOK.
Oncethealarmisacknowledged:
•theDialogisclosedandtheaudiblealarmis
silenced.
•ifnavigatingaroutethenthenextwaypointis
selected.
Note:Youcansettheradius(distance)ofthe
waypointarrivalcirclewhichisusedtotriggerthe
waypointarrivalalarm.
CrossTrackError(XTE)
CrossTrackError(XTE)istheamountofdeviation
fromyourintendedrouteorwaypoint,expressedas
adistance.
D11765-2
XTE
Intheeventthatyousteeroff-track,youcango
straighttoyourtargetbyresettingXTE.
ResettingCrossTrackError(XTE)
Whilefollowingarouteinthechartapplication:
1.Selecttheroute.
Theroutecontextmenuisdisplayed.
2.SelectRestartXTE.
ResettingXTEresultsinanewcoursefromthe
currentvesselpositiontothecurrenttargetwaypoint.
Thisdoesnotaffectyoursavedroute.
D12295-1
YoucanalsoresettheXTEfromtheNavigateMenu:
Menu>Navigate>RestartXTE.
Navigatingaroute
Youcanfollowanyroutestoredonthedisplay.
Whenfollowingarouteyouvisiteachwaypointin
order.Youmayalsousethefollowrouteoptions
inconjunctionwithacompatibleautopilotto
automaticallynavigatealongyourchosenroute.
D
11751-2
Thereareanumberofwaystoselectthefollow
routeoption:
•Usingastoredroutewithintheroutelist.
236aSeries/cSeries/eSeries