RL78/F13, F14 CHAPTER 17 LIN/UART MODULE (RLIN3)
R01UH0368EJ0210 Rev.2.10 1148
Dec 10, 2015
(12) LIN Wake-up Configuration Register (LWUPn)
Address: F06CBH
7 6 5 4 3 2 1 0
WUTL[3:0] — — — —
Value after reset:
0 0 0 0 0 0 0 0
Bit Symbol Bit Name Function R/W
3 to 0 — Reserved These bits are always read as 0. The write value should
always be 0.
R/W
7 to 4 WUTL[3:0] Wake-up Transmission Low Width
Select
b7 b4
0 0 0 0: 1 Tbit
0 0 0 1: 2 Tbits
0 0 1 0: 3 Tbits
0 0 1 1: 4 Tbits
:
1 1 0 0: 13 Tbits
1 1 0 1: 14 Tbits
1 1 1 0: 15 Tbits
1 1 1 1: 16 Tbits
R/W
Set the LWUPn register when the OMM0 bit in the LMSTn register is 0 (LIN reset mode).
WUTL[3:0] bits (wake-up transmission low width select bits)
The WUTL bits set the low width of the wake-up frame transmission.
1 Tbit to 16 Tbits can be set.