011
Port 80 Enable
Controls if permission is given to get access to the SOAP method over Port 80 on the NRS
network.
[0~1/1]
0: No. Access denied
1: Yes. Access granted.
021
RCG – C Registed
This SP displays the Cumin installation end flag.
1: Installation completed
2: Installation not completed
022
RCG – C Registed Det RCG – C Registered Detail
This SP displays the Cumin installation status.
0: Basil not registered
1: Basil registered
2: Device registered
023
Connect Type (N/M)
This SP displays and selects the Cumin connection method.
0: Internet connection
1: Dial-up connection
061
Cert. Expire Timing DFU
Proximity of the expiration of the certification.
062
Use Proxy
This SP setting determines if the proxy server is used when the machine communicates with the
service center.
067
CERT: Up State
Displays the status of the certification update.
0 The certification used by Cumin is set correctly.
1
The certification request (setAuthKey) for update has been received from the GW URL
and certification is presently being updated.
Service Program Mode Tables
215
To Next Page
Loading...
