[0~2/1]
0: Remote diagnostics off.
1: Serial (CSS or NRS) remote diagnostics on.
2: Network remote diagnostics.
002
CE Call
Lets the service technician start or end the remote machine check with CSS or NRS; to do this,
push the center report key
003
Function Flag
Enables and disables remote diagnosis over the NRS network.
[0~1/1]
0: Disables remote diagnosis over the network.
1: Enables remote diagnosis over the network.
007
SSL Disable
Controls if RCG (Remote Communication Gate) confirmation is done by SSL during an RCG
send for the NRS over a network interface.
[0~1/1]
0: Yes. SSL not used.
1: No. SSL used.
008
RCG Connect Time RCG Connect Timeout
Sets the length of time (seconds) for the time-out when the RCG (Remote Communication Gate)
connects during a call via the NRS network.
[1~90/1 sec.]
009
RCG Write Timeou RCG Write to Timeout
Sets the length of time (seconds) for the time-out when sent data is written to the RCG during a
call over the NRS network.
[0~100/1 sec.]
010
RCG Read Timeout
Sets the length of time (seconds) for the timeout when sent data is written from the RCG during
a call over the NRS network.
[0~100/1 sec.]
5. Service Tables
214
To Next Page
Loading...
