0:Free run mode off.
1:Free run mode on.
5803
Input Check
Displays the signals received from sensors and switches. (See "Input Check")
5804
Output Check
Turns on the electrical components individually for test purposes. (See "Output Check")
5807 Option Connect Chk Option Connection Check
002 Bank (Paper Tray Unit)
Execution will return either a “1” or “0”:
0: Device not connected correctly.
1: Device connected correctly.
003 LCT
004 Fin (Finisher)
5811 MachineNo. Setting Machine Number Code Setting DFU
This SP presents the screen used to enter the 11-digit number of the machine. The allowed entries
are "A" to "Z" and "0" to "9". The setting is done at the factory, and should not be changed in
the field.
001 Code Set
003 ID2 Code Display
5812 Tel. No. Setting
001 Service
Inputs the telephone number of the CE (displayed when a service call
condition occurs.)
002 FAX TEL No.
Use this to input the fax number of the CE printed on the Counter Report
(UP mode). Not Used
581
6
Remote Service
001
I/F Setting
Turns the remote diagnostics off and on.
Service Program Mode Tables
213
To Next Page
Loading...
