001 Display
The “Counter Clear Day” has been changed to “Installation Date” or
“Inst. Date”.
003 Total Counter
Determines whether the installation date is printed on the printout for
the total counter.
[0~1/1]
0: No Print
1: Print
5851
Bluetooth Mode
Sets the operation mode for the Bluetooth Unit.
*Public Private
Note: This printer does not support the use of Bluetooth at this time (April 2006)
5856 Remote ROM Update
When set to “1” allows reception of firmware data via the local port (IEEE 1284) during a
remote ROM update. This setting is reset to zero after the machine is cycled off and on.
[0~1 / 0 / 1]
0: Not allowed
1: Allowed
5857 Save Debug Log
001
On/Off
(1:ON 0:OFF)
Switches on the debug log feature. The debug log cannot be captured until this feature is
switched on.
[0~1/1]
0: OFF
1: ON
002
Target
(2: HDD 3: SD Card)
Selects the destination where the debugging information generated by the event selected by
SP5858 will be stored if an error is generated
5. Service Tables
230
To Next Page
Loading...
