This SP copies the log on an SD card (the file that contains the information written directly
from shared memory) to a log specified by key number.
016
Make HDD LogFile
This SP creates a 32 MB file to store a log on the HDD.
017
Make SD LogFile
This SP creates a 4 MB file to store a log on an SD card.
5858
DebugSaveWhen
These SPs select the content of the debugging information to be saved to the destination
selected by SP5857 002.
SP5858 3 stores one SC specified by number. Refer to Section 4 for a list of SC error codes.
001 EngineSC Error
0:OFF 1:ON
Stores SC codes generated by engine errors.
002 SystemSC Error
0:OFF 1:ON
Stores SC codes generated by GW controller errors.
003 Any SC Error
0:OFF 1:ON
[0~65535 / 0 / 1]
004 Jam
0:OFF 1:ON
Stores jam errors.
5859 Debug Log Save Function
001 Key 1
These SPs allow you to set up to 10 keys for log files for
functions that use common memory on the controller board.
[-9999999~9999999 / 0 / 1]
002 Key 2
003 Key 3
004 Key 4
005 Key 5
006 Key 6
007 Key 7
5. Service Tables
232
To Next Page
Loading...
