This SP determines whether the RAM disk is used for either the mail function or PDL Storage.
[0~1/0/1] 0:Used 1:Not used
001 Mail Function
002 PDL Storage
Sets the amount of RAM disk used for PDL storage. The size of the
RAM disk may need adjustment, depending on the amount of mem-
ory in the machine.
[0~255/4/1]
5870
Common Key Info W Common Key Information Writing
Writes to flash ROM the common proof for validating the device for NRS specifications.
001 Writing
These SPs are for future use and currently are not used.
003 Initialize
5873
SDCardAppliMove Move Application on SD Card to Another SD Card
Allows you to move applications from one SD card another. For more, see "Merging Applica-
tions on One SD Card"
001 Move Exec Executes the move from one SD card to another.
002 Undo Exec This is an undo function. It cancels the previous execution.
5876
Security Clear DFU
This SP code clears all security data, only security data in the NCS area, or only security data
in the UCS area.
001 All Clear
011 Clear NCS Sec.
015 Clr UCS Sercurity
5878
Option Setup Data Overwrite Security (DOS) Setup
Press [#Enter] to initialize the Data Overwrite Security option. For more, see "MFP Controller
Options" in Section "1. Installation".
5. Service Tables
236
To Next Page
Loading...
