Code Cause Solution
004 Unsupported device. A function not supported by the target
device is specified. Check the target device.
005 Unsupported item. A setting item not supported by the target
device is specified. Check the target device.
006 Unsupported value. A configuration values not supported by the
target device is specified. Check the target
device.
019 The target application is not installed. The machine is operating normally.
020 The target application is not activated. The machine is operating normally.
023 An application is installed on the device. The machine is operating normally.
027 The latest application is already installed. The machine is operating normally.
050 The device is managed using an
application such as MK-1.
The device is managed using Ricoh key card
MK1 or other management tools. You
cannot retrieve any data.
056 Unknown data has been retrieved. Check the status of the retrieved device.
057 An unknown device has been retrieved. Check the status of the retrieved device.
058 Waiting to reboot The device is restarting, so wait for it to be
completed.
059 The entry does not exist. The Address Book entry for the device and
the template are not the same.
060 The entry does not exist. The Address Book entry for the device and
the template are not the same.
061 It is necessary to install the Type -C
extended feature.
Perform installation from Web Image
Monitor.
Restart the device after installation has
completed.
062 It is necessary to uninstall the Type -C
extended feature.
Perform uninstallation from Web Image
Monitor.
Restart the device after uninstallation has
completed.
8. Appendix
110
To Next Page
Loading...
