Item name Description
Subnet Mask Enter the subnet mask of the broadcast. An IPv4 address can
be specified.
[Access Accounts] tab
Set an account used for access to devices at the time of discovery. Change the account to be used
from [Not Assigned Accounts] to the [Assigned Account] list by clicking the [ ] [ ] button or by
dragging and dropping.
[General] tab
If the [Reverse DNS Lookup] is enabled, the machine detects the host name by applying reverse
lookup from the detected device address. If the machine fails to detect it, the device address
appears.
Item name Description
Reverse DNS Lookup Select this to enable the [Reverse DNS Lookup] to identify
device host names.
[Network Search] tab
Discovery tasks implemented by network search are displayed in a list.
A network search task is configured on the [Discovery Range (Network Search)], [Access Accounts],
and [General] tabs.
[Discovery Range (Network Search)] tab
Set the target range of discovery by network search.
Discovery and Polling
53
To Next Page
Loading...
