Firmware Updating
SM 5-11 M018/M019
System
Maintenance
Reference
10. Press any menu key on the machine’s operation panel.
11. Press the [
] [ ] keys to select [Reports Print], and then press the [OK] key.
12. Press the [
] [ ] keys to select [Configuration Page] and then press the [OK] key.
Take note of the new firmware version (shown under “Firmware Version” on the
configuration page).
13. Reconnect the telephone line cable to the machine.
The update’s percentage of completion might not be displayed, depending on which
version of the firmware is currently installed.
In addition to printing a configuration page, you can check the machine’s firmware
version by accessing the machine using a web browser. For details, see “Checking
Machine Status” in the User Guide.
Depending on how it is configured, the machine might start up in fax mode following
the firmware update.
http://www.manuals4you.com
To Next Page
Loading...
