Firmware Updating
M018/M019 5-12 SM
5.3.4 UPDATING THE ENGINE FIRMWARE
1. Make a folder in your computer.
2. Save the files (".bin", ".fwu", ".ini" and ".exe") in the folder.
3. Click the exe file to execute the updating program.
4. Click "Eng. F/W Update (USB or NET)" to send the engine firmware from PC to MF
printer.
The "F/W Update (USB or NET)" buttons are for designer use only. Do not use
these buttons.
5. The machine makes a beep sound when starting the firmware update.
6. The image above is displayed at the PC and "Firmware update" and "Updating" are
displayed on the operation panel.
7. Then, you can close this window at your PC.
http://www.manuals4you.com
To Next Page
Loading...
