Image Problems
SM 6-3 M018/M019
Trouble-
shooting
6.2.2 CHECKING A SAMPLE PRINTOUT
Print out a mono-color pattern (all K, C, M, or Y), which will clarify if the cause is a problem
with one of the AIOs, the image transfer belt, image transfer roller, or the fusing unit. A
sample page is provided with the printer driver's CD. You can print the sample page from the
printer driver's CD. Before printing, you have to adjust the printer driver settings to make the
problem become obvious. For details about adjusting the settings, refer to "Printer Driver
Setting for Printing a Sample" described below.
Occurs with 1-3 colors: AIO unit(s) failure
Occurs with all four colors: Image transfer belt, transfer roller or fusing unit failure
http://www.manuals4you.com
To Next Page
Loading...
