Service Menu
M018/M019 4-6 SM Appendix
Engine Maintenance
Init Engine
EEPROM
This clears all counters except "Full Color" and "Black and White" in
the total counter.
When you execute "Init Engine EEPROM", the engine EEPROM is
initialized.
Turn the machine power off/on after you change this setting.
Model
Displays only
1: MF2b
2: M019
Displays the current model in a dropdown list.
Do not change this setting (Designed for Factory Use).
Brand ID
00* – 7F
Displays the current brand ID number.
Do not change this setting (Designed for Factory Use).
LSU Adjustment
Input 160 bytes
setting.
Character: alphanumeric "0-9", "a-f", "A-F", only
valid data can be input.
Input length: 160 bytes
Trans. Belt Adjust
When you execute "Trans. Belt Adjust", the transfer belt adjustment is
done. This calibrates the motor speed to match the length of the new
transfer belt.
Fuser SC Detect On/Off*
If On, the engine detects SC559. If Off, the engine
does not detect "Fusing SC Reset".
Color
Registration
The engine will do color registration and density tuning automatically.
The machine will warm up automatically after this setting is changed.
Reset Transfer
Unit Life Counter
Resets the transfer unit life counter.
http://www.manuals4you.com
To Next Page
Loading...
