Service Menu
SM Appendix 4-13 M018/M019
Appendix:
SP Mode
Tables
Fax Maintenance
RTN Rate
The machine checks the actual data
reconstruction errors and then transmits an RTN
depending on the decoding error rate that is set by
this setting (Number of lines containing an error
per page / Total number of lines per page).
[10%/ 15%]
V34 Modem
DFU
[Permitted (Default)/ Prohibited]
Comm Settings
V17 Modem
DFU
[Permitted (Default)/ Prohibited]
Equalizer
These selectors set the equalizer's training level to
be applied if training fails due to poor line
connection.
[Automatic (Default)/ 4 Points/ 16 Points]
Redialing
Resend when a communication error occurs.
[Disabled (Default)/ Not Disabled]
First TX Speed
Sets the first transmission speed choice, before
fallback.
[2400 Bps/ 4800 Bps/ 7200 Bps/ 9600 Bps
/ 12000 Bps/ 14400 Bps/ 16800 Bps/ 19200 Bps/
21600 Bps/ 24000 Bps/ 26400 Bps/ 28800 Bps/
31200 Bps/ 33600 Bps (Default)]
V34 Settings
Symbol Rate
This setting limits the transmission speed range in
V.34 mode by masking the desired symbol rate(s).
[Not Used (Default)/ 3429 Sym/Sec
/ 3200 Sym/Sec/ 3000 Sym/Sec
/ 2800 Sym/Sec/ 2400 Sym/Sec]
http://www.manuals4you.com
To Next Page
Loading...
Need help?
General
