Technical Bulletin PAGE: 1/1
Subject: Firmware Release Note: PCL Font
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept
Mechanical
Paper path
Product Safety
Electrical
Transmit/receive
Other (Firmware)
Service manual revision
Retrofit information
Tier 2
This RTB has been issued to announce the firmware release information for the PCL Font.
Note: Definition of Availability of RFU via @Remote
“Available” The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Modified Points or Symptom Corrected