Technical Bulletin PAGE: 1/1
Service Manual Correction
Please add the following note after Step 5 in your FSM in section:
Replacement and Adjustment > Fusing Unit > IH Coil Unit (pg. 777)
4.A ×2
5. F ×2
Screws removed in Step 4 and Step 5 are different in type. Work carefully
to avoid mixing up the screws when putting back the fusing unit. (See the
Screw List on page 762.)
Subject: Manual Correction: Fusing IH Coil Unit
From: PP Tech Service Dept., 1st PP Tech Service Sect.
Mechanical
Paper path
Product Safety
Electrical
Transmit/receive
Other ( )
Service manual revision
Retrofit information
Tier 2