Ricoh CH-C1 - RTB 22 c: Firmware Release Note: SG3-ND

Technical Bulletin PAGE: 1/1
Reissued: 05-Jan-17
Model: Al-C2/AP-C3/AT-C3/MT-C5/Ch-C1/Cor-C1/MET-
C1ab/MET-C1ab_ch/MET-C1cde/MET-C1cde_ch/MET-
C1yz/MET-C1yz_ch/MET-C2ab/MET-C2cde/MET-
C2yz/OR-C2/OR-C2_ch/MT-C6/Ch-C2/Cor-C1.5
Date: 23-Feb-12
No.: RD129022c
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: SG3-ND
Prepared by: M. Kumagai
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other (Firmware)
Tier 2
This RTB has been issued to announce the firmware release information for the SG3-ND.
Version
Program No.
Effective Date
Availability of RFU
09
D3BV5570
November 2016 production
Available
08
D5455575B
June 2015 production
Available
07
D5455575A
1st Mass production
Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version
Modified Points or Symptom Corrected
09
By changed the standard of FAX, the firmware is corrected.
08
Symptom corrected:
Only Japanese domestic market
07
1st Mass production