Ricoh CH-C1 - RTB 96: Installation Procedure for D135;D136

Technical Bulletin PAGE: 1/34
Model: Model CH-C1a
Date: 28-Mar-14
No.: RD135101
Subject: Installation Procedure for D135/D136
Prepared by: Takeshi Toriumi
From: 1st Tech Service Sect. MFP/P Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier 2
Service Manual Revision
Replace the “Main Machine Installation for D135/D136” procedure on pp. 54-110 with the
procedure below.
Modification History:
RTB No.
FSM Pg.
Revised Contents
RD135096
55
“Special Tools and Lubricants” was updated.
RD135096
59-60
“Accessory Check” was updated.
RD135096
86
The picture used in Step 6 of the “Installation Procedure
(D135/D136)” was replaced.
RD135096
88
Step 3 of “Attaching the ITB Separation Lever” was updated.
RD135028b
86-90
“Removing the Retainers of the Charge Roller Units” was
added.
RD135096
98
“How to Set the Toner Cartridge” was updated.
RD135096
98
“Storing the Factory SP Sheet” was updated.
RD135096
98-99
“Check Image Quality / Settings” was updated.