Technical Bulletin PAGE: 1/1
Reissued: 17-Jan-17
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: RPCS
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept
Electrical
Transmit/receive
Service manual revision
Retrofit information
Product Safety Other (Firmware)
This RTB has been issued to announce the firmware release information for the RPCS.
Note: Definition of Availability of RFU via @Remote
“Available” The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Modified Points or Symptom Corrected
When “Unauthorized Copy Prevention Printing: Printer” is enabled, an
error might occur, causing the job to be cancelled. (GFPR#RA14120002)
Symptom corrected:
- If the number of copies for a collated job is set to "1" in the driver and the
number of copies is changed on the operation panel in which Enhanced
Locked Print NX v2 is installed, then the Collate setting in the driver might
not be applied.
- When printing certain documents in Microsoft Word, an SC899 error might
occur.