Technical Bulletin PAGE: 1/1
Service Manual Correction
Please add the following description in bold regarding Jam Detection to your field service
manual, in this section:
5. Troubleshooting > Jam detection > Jam Codes and Positon Codes > Main
Machine (Pg. 1327, 1328)
Registration
Sensor: Late Jam
The paper did not reach the registration sensor within
the prescribed time after passing the relay sensor.
Position code depends on the location of the jammed sheet.
The paper did not reach the registration rollers when the
request for registration was already received.
Subject: FSM correction – Detail of Jam Codes 19 and 96
Prepared by: Akira Shigeta
From: 1st MFP Tech Service Sec., MFP Tech Service Dept.
Mechanical
Paper path
Product Safety
Electrical
Transmit/receive
Other ( )
Service manual revision
Retrofit information
Tier 2