Technical Bulletin PAGE: 1/1
Reissued: 02-Apr-15
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: GWFCU3.8-1(WW)
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept
Electrical
Transmit/receive
Service manual revision
Retrofit information
Product Safety Other (Firmware)
This RTB has been issued to announce the firmware release information for the
GWFCU3.8-1(WW).
Note: Definition of Availability of RFU via @Remote
“Available” The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Modified Points or Symptom Corrected
Symptom corrected:
Cannot print out the following lists when LT (SEF) or HLT (LEF) has been
selected for printing.
1. User parameter list
2. Special Sender List
3. Journal (FAX communication report)
4. Memory storage report
5. System parameter list (for field technicians)
6. Service monitor report (for field technicians)
7. Memory dump list (for field technicians)
Note: This does not occur when printing out a received FAX by itself, but can
occur if the machine tries to print out a journal after receiving a FAX.ter
receiving the fax.
1. Stored FAX reception documents cannot be accessed from WIM after the
machine recovers from Energy Saver mode.
2. SC899 may occur after the machine recovers from Energy Saver mode.